Official UAE distributor: Specialty Batch Coffee, Dubai+971 4 299 1113
  1. Home
  2. Technology
  3. Near-infrared roasting
The heat source

Near-infrared coffee roasting

Near-infrared roasting heats coffee with short-wave infrared light instead of a gas flame or hot air. In a Rubasse the lamp sits on the axis of the drum, so the energy lands on the beans directly. You get heat that answers in about three seconds, even development through the bean, and roughly half the energy use of conventional roasting.

  • 750–1500 nmLamp wavelength
  • 3 sHeat response
  • 1%Power steps
  • ~50%Less energy
1234
  1. 01Near-infrared lamp on the drum axis
  2. 02Absorbed straight into the beans
  3. 03Reflected back in by the drum wall
  4. 04What warms the drum ends up in the coffee too

How does near-infrared roasting work?

Every roaster has stood waiting for a sluggish drum to catch up with a simple tweak. That lag comes from the chain of command: gas heats the drum and the air, and they heat the coffee. Each link loses energy and adds delay.

A Rubasse cuts most of the chain out. Short-wave halogen lamps at the centre of the chamber throw near-infrared light, and the beans tumbling around the lamp soak it up. Light that misses on the first pass bounces off the drum wall and back into the bean mass, or warms the drum and the air. All of it ends up in the coffee, because the coffee is the coolest thing in the room. Rubasse calls this the heat resonator.

Why does the wavelength matter?

The lamps emit between 750 and 1500 nanometres. Rubasse chose that band on the back of grain-drying research showing it is absorbed well by grain products. The company states that it penetrates the bean and does not only heat the surface, which is the main difference from the far-infrared elements in some other electric roasters.

In the cup, that means the inside and the outside develop together. Fewer roasts that look finished on the surface and taste baked or underdone.

What changes at the roaster?

  • A heat change takes effect in about three seconds. On a typical drum roaster it is a minute or more.
  • Power moves in linear 1% steps from the touch screen, so small corrections are real corrections.
  • A full 3 kg batch on the Micro can climb at 25°C a minute.
  • Electricity is a steady input. No drift from gas pressure, gas mix or combustion.

How much energy does it save?

A technology scan published by New Zealand’s Energy Efficiency and Conservation Authority (EECA) reports that near-infrared roasting “results in approximately 50% less energy consumption due to the effective heat method”.

Less wasted energy is also less waste heat. The roasting room stays cooler and the air conditioning has less to do, which in the Gulf is money back every month.

Near-infrared roasting: questions and answers

Is a Rubasse a fully electric coffee roaster?

Yes. Every Rubasse roaster is heated by near-infrared halogen lamps and runs on single-phase electricity. There is no gas connection, no flame and no combustion smell in the coffee.

Are electric coffee roasters powerful enough for production?

A Rubasse is. The Micro 3kg can reach a rate of rise of 25°C a minute with a full 3 kg batch, and the manufacturer reports taking a full batch to 225°C in about nine and a half minutes. Roast times are in line with a gas drum roaster.

What is near-infrared coffee roasting?

It is roasting with short-wave infrared light instead of a flame or hot air. In a Rubasse, halogen lamps at the centre of the drum emit light between 750 and 1500 nm, which the beans absorb directly. Heat reaches the coffee faster, with far less lost to the machine and the room.

How is near-infrared different from other infrared roasters?

Most infrared roasters use far-infrared elements, which mainly heat the surface of the bean and lean on conduction and convection for the rest. Rubasse uses short-wave near-infrared, which the company states penetrates into the bean. Its centre-placed lamp design is patented.

How much energy does a Rubasse roaster use?

About half as much as conventional roasting. A technology scan by New Zealand’s Energy Efficiency and Conservation Authority reports approximately 50% less energy consumption for near-infrared roasting. Maximum power draw is 1,650 W for the Nano Pro 1s, 2,700 W for the Hyper 1.2kg and 5,350 W for the Micro 3kg.

Does coffee from an electric roaster taste different?

It can taste cleaner. There are no combustion gases in the drum, and near-infrared heat develops the inside and outside of the bean together, which cuts down on baked or uneven roasts. The profile still decides the flavour, and that part is all yours.

Come and watch one roast

Tell us what you roast and how much. We will point you at the right model, send a quote in AED and book you a demo at Port Rashid. Bring your own green coffee.

WhatsApp us