Official UAE distributor: Specialty Batch Coffee, Dubai+971 4 299 1113
  1. Home
  2. Roasters
  3. Hyper 1.2kg
Tabletop shop roaster · 300 g – 1.2 kg

Rubasse Hyper 1.2kg electric coffee roaster

The Rubasse Hyper 1.2kg is a tabletop electric coffee roaster for 300 g to 1.2 kg batches. It heats with near-infrared light, runs on 220 V single-phase power at 2,700 W, and automates charging, roasting, discharge and cooling. It is built for cafés roasting in-house and for small roasteries.

Rubasse Hyper 1.2kg electric coffee roaster
  • 300 g – 1.2 kgBatch size
  • 2,700 WMaximum power, single-phase
  • 6 kgGreen coffee per hour, at five batches
  • 85 × 46 cmFootprint
Who it is for

Who should choose the Hyper 1.2kg?

  • Cafés that want their own coffee roasted on site
  • New micro-roasteries starting at modest volume
  • Roasteries that need a second machine for small lots and decaf
  • Multi-site operators who want one profile in every shop

At five full batches an hour the Hyper 1.2kg gets through about 6 kg of green coffee an hour. Roast four hours a day, five days a week, and that is around 520 kg a month. Work it out for your own hours

Rubasse Hyper 1.2kg roasting a batch, with the roast curve on its touch screen
Automation level

The Hyper 1.2kg is a Level 3 roaster

Level 3 is Auto-Pilot. Save a roast you like and the machine follows its temperature curve on every later batch, trimming the heat whenever the readings drift. Rubasse describes this as where mainstream high-end roasters are today.

Level 4, which follows the whole roast plan and not only temperature, is fitted to the Micro Roast-Master.

  1. Lv.1

    Digital assist

    Records the roast and controls it digitally. You still roast every batch by hand

    Below the Rubasse range
  2. Lv.2

    Settings replication

    Replays your actions: the same heat, airflow and drum speed at the same moments

    Pre-order only, on select models
  3. Lv.3

    Auto-Pilot

    Follows your temperature curve and corrects the heat whenever the readings drift

    Nano Pro 1s · Hyper Pro · Hyper Pro Plus · Micro Pro
  4. Lv.4

    Roast-Master

    Follows your whole roast plan: bean temperature, rate of rise, pressure, time and heat together

    Micro Roast-Master
In use

What the Hyper 1.2kg does well

01

About a minute of your time per batch

Pick a saved profile and the Hyper preheats, charges, roasts, drops and cools by itself. That matters when the person roasting is also running the bar.

02

A screen that goes where you need it

The touch screen sits on an arm that swings several ways, so the roaster can live in a corner, against a wall or on a narrow counter.

03

Quick to learn

Heat responds in seconds and moves in 1% steps. New staff see what each change does straight away, which is how people get good fast.

One touch

What the Hyper 1.2kg does on its own

  1. Preheat

    Up to charge temperature in three to five minutes, and held there

  2. Charge

    Green coffee drops into the drum on its own

  3. Roast

    Heat, airflow and drum speed follow your saved profile

  4. Discharge

    The batch drops at the end point you set

  5. Cool

    Stirred and cooled in the tray, then released

Data

Hyper 1.2kg specifications

Batch capacity300 g – 1.2 kg
Heat sourceNear-infrared halogen lamps, centre of drum
Maximum power2,700 W
Power supply220 V single-phase
DimensionsL 85 × W 46 × H 77 cm
Weight41 kg
Controls15.6-inch touch screen: heat, airflow, drum speed
ColoursWhite or black
Made inTaiwan

Hyper 1.2kg variants

FeatureHyper ProHyper Pro Plus
Automation levelLv.3Lv.3
ReplicationAuto-Pilot profile replicationAuto-Pilot profile replication
Bean temperatureStandardStandard
Air temperatureStandardStandard
Differential pressureOptionalStandard
Drum temperatureOptionalStandard
Exhaust moistureOptionalStandard
Optional add-ons

Add-ons for the Hyper 1.2kg

Fitted at the factory when you order. Tell us which ones you want and we will quote for them.

Available for the Hyper Pro

  • Differential pressure sensorMeasures the pressure difference across the drum, which tells you what the airflow is really doing.
  • Drum temperature sensorReads the temperature of the drum itself, so you can see stored heat building or draining between batches.
  • Exhaust moisture meterPlots the moisture leaving the coffee in real time. First crack shows up on screen as a clear rise.

Available for the Hyper Pro Plus

Nothing to add. Every sensor comes fitted as standard.

Installation

Installing the Hyper 1.2kg in the UAE

We go through power and exhaust with you before the roaster leaves our warehouse.

  • Power: 2,700 W on 220–240 V single-phase, about 12 A. We recommend a dedicated circuit.
  • Space: 85 × 46 cm of bench including the touch screen, with clearance above for the hopper.
  • Exhaust: you will need a duct to outside or a filtration unit. We will help you choose.
Included in the UAE

What comes with the Hyper 1.2kg

Every standard UAE sale comes with the six things below. Outside the UAE we sell into the wider GCC on a limited basis, so ask us first.

  1. 01

    Delivery

    To your door, anywhere in the seven emirates

  2. 02

    Installation

    Placed, connected and commissioned by our own technicians

  3. 03

    Operational training

    Running the machine, reading the screen, keeping it clean

  4. 04

    Profile development training

    Building and saving profiles on your coffees, not ours

  5. 05

    Warranty maintenance programme

    One year of maintenance and after-sales support

  6. 06

    Spare parts in Dubai

    Held locally, so an urgent fix does not wait on a shipment

1234
  1. 01Near-infrared lamp on the drum axis
  2. 02Absorbed straight into the beans
  3. 03Reflected back in by the drum wall
  4. 04What warms the drum ends up in the coffee too
Inside

The technology in the Hyper 1.2kg

Near-infrared roasting

Near-infrared roasting heats coffee with short-wave infrared light instead of a gas flame or hot air.

Automatic roasting

A Rubasse roaster can run a whole roast on its own.

Automation levels

Rubasse sorts automatic coffee roasters into four levels by what the machine repeats.

Exhaust moisture meter

The exhaust moisture meter is a sensor that measures how much moisture is leaving the coffee during a roast.

Hyper 1.2kg: questions and answers

Which Rubasse roaster is right for a café?

For most cafés roasting their own coffee, the Hyper 1.2kg is the right size. It roasts 300 g to 1.2 kg a batch and about 6 kg of green coffee an hour, sits on a bench, and needs under a minute of attention per batch. Cafés supplying several sites or wholesale customers should look at the Micro 3kg, and the Mega 6kg is coming for larger volumes.

What is the smallest batch I can roast?

The Nano Pro 1s roasts from 150 g, and the Hyper 1.2kg and Micro 3kg both roast from 300 g. Because the heat goes straight into the beans, a small batch on a bigger machine is controlled the same way as a full one.

What is the difference between the Hyper Pro and the Hyper Pro Plus?

Same roaster, different sensors. The Hyper Pro has bean and air temperature as standard, with drum temperature, exhaust moisture and differential pressure as optional add-ons. The Hyper Pro Plus has all five fitted as standard.

What optional add-ons are available?

The add-ons are sensors and control systems fitted at the factory: a drum temperature sensor, the exhaust moisture meter, a differential pressure sensor and air pressure compensation. Which ones are optional depends on the model and variant, and each roaster page lists its own. The Hyper Pro Plus has every sensor as standard.

Do I need Level 4 automation?

Rubasse recommends Level 4 if you carry more than about 30 coffees, or if you roast to order and hold no roasted stock. For a shorter list of coffees and a steady routine, Level 3 does the job well. If your green coffee sits for more than a month, choose Level 3 at least, because stored coffee shifts with the weather.

What does fully automatic mean on a Rubasse roaster?

It means the machine can run a complete roast without you. After you pick a saved profile it preheats, charges the green coffee, roasts to the profile, discharges, stirs and cools the batch. You load the hopper and collect the coffee.

What is the exhaust moisture meter?

It is a sensor that measures the moisture leaving the coffee during a roast and plots it live. First crack shows up as a clear rise in the curve, which helps with judging roast level, adjusting heat in development and timing the drop.

Does an electric roaster still need ventilation?

Yes. Any roaster makes smoke, smell and chaff, whatever the heat source. You will need an exhaust duct to outside or a filtration unit, and an electrostatic filter system is available to cut smoke emissions. What is acceptable depends on your premises and landlord, and we help you plan it before delivery.

Ask about the Hyper 1.2kg

Tell us your monthly volume and where the roaster will live. We will confirm the right variant, quote in AED and book you a demo in Dubai.

WhatsApp us