- Home
- Technology
- Automation levels
Roaster automation levels: Lv.1 to Lv.4
Rubasse sorts automatic coffee roasters into four levels by what the machine repeats. Level 2 replays your settings. Level 3, Auto-Pilot, follows a temperature curve and corrects as it goes. Level 4, Roast-Master, follows the whole roast plan: bean temperature, rate of rise, pressure, time and heat together. The Rubasse roasters we stock in the UAE are Level 3 or Level 4, and Level 2 is available by pre-order on select models.
- 4Levels of automation
- Lv.3Nano, Hyper and Micro Pro
- Lv.4Micro Roast-Master
- 30+Coffees on your list: choose Lv.4
- Lv.1
Digital assist
Records the roast and controls it digitally. You still roast every batch by hand
Below the Rubasse range - Lv.2
Settings replication
Replays your actions: the same heat, airflow and drum speed at the same moments
Pre-order only, on select models - Lv.3
Auto-Pilot
Follows your temperature curve and corrects the heat whenever the readings drift
Nano Pro 1s · Hyper Pro · Hyper Pro Plus · Micro Pro - Lv.4
Roast-Master
Follows your whole roast plan: bean temperature, rate of rise, pressure, time and heat together
Micro Roast-Master
Which level do you need?
Rubasse’s own guidance, applied to the roasters we sell here.
- Lv.3 or Lv.4
Up to about 30 coffees on your list
Level 3 or Level 4. Both hold a specialty roast steady across a varied menu.
- Lv.4
More than 30 coffees
Level 4. The more profiles you run, the more a plan-following system earns its keep.
- Lv.4
You roast to order and hold no roasted stock
Level 4. When every batch ships the same day, there is no second chance to fix one.
- Lv.3 or Lv.4
Your green coffee sits for more than a month
Level 3 at least. Stored coffee shifts with the weather, and the machine needs to correct for it.
- Lv.3 or Lv.4
Several shops roasting specialty coffee
Level 3 or higher, so every site lands the same cup.
The four levels side by side
| Level | What it repeats | What it reads while roasting | When conditions change | Rubasse in the UAE |
|---|---|---|---|---|
| Lv.1 Digital assist | Nothing. It logs data for you | Whatever sensors are fitted | You correct by hand | None |
| Lv.2 Settings replication | Your settings, step by step | Nothing it acts on | The roast moves with them | Pre-order only, on select models |
| Lv.3 Auto-Pilot | A temperature curve | Temperature | Heat is corrected to hold the curve | Nano Pro 1s, Hyper Pro, Hyper Pro Plus, Micro Pro |
| Lv.4 Roast-Master | The whole roast plan | Bean temperature, rate of rise, pressure difference, time and heat | Least affected of the four | Micro Roast-Master |
What are the levels of roaster automation?
“Fully automatic” covers a lot of ground. Mechanically, most automatic roasters do the same things: they charge, discharge and cool on their own. Where they differ is in the logic that decides what the heat, the air and the drum should be doing at each moment of the roast.
Rubasse sorts that logic into four levels. Level 1 only records and assists. Levels 2, 3 and 4 each repeat a roast, but they repeat different things, and that is the whole difference.
What is Level 2 automation?
Level 2 replays your settings. If you ran 80% heat for the first three minutes, it runs 80% heat for the first three minutes. It is repeating what you did, with no idea whether it is working.
That is fine when nothing changes. But a warmer room, a damper coffee or a smaller charge all move the roast, and a Level 2 machine carries on regardless. In the UAE, Level 2 is available by pre-order on select models.
What is Level 3 automation?
Level 3 follows a temperature. On a Rubasse this is Auto-Pilot: the machine reads the temperature through the roast, compares it with your saved curve, and corrects the heat whenever the two drift apart. It is repeating the result you got, not the buttons you pressed.
Rubasse describes Level 3 as where mainstream high-end roasters are today. It is fitted to the Nano Pro 1s, both Hyper variants and the Micro Pro.
What is Level 4 automation?
Level 4 follows the roast plan. A roaster does not think in temperature alone. You think about how fast the coffee is climbing, what the airflow is doing, how long development runs and how much heat is going in. Roast-Master works from the same picture: bean temperature, rate of rise, pressure difference, time and heat, taken together.
Rubasse names three things that knock a roast off course: how stable the roasting environment is, the condition of the green coffee, and the charge weight. Each level up is less affected by them, and Level 4 is the least affected of all. It is fitted to the Micro Roast-Master.
Does the level change the flavour?
It changes how often you get the flavour you planned. Every roaster has watched a curve behave itself on screen while the cup told a different story. The higher the level, the more of the roast the machine is holding steady, so the more of your batches land where you meant them to.
Automation levels: questions and answers
What is Level 4 automation on a Rubasse roaster?
Level 4, called Roast-Master, is Rubasse’s highest automation level. It follows your whole roast plan, taking bean temperature, rate of rise, pressure difference, time and heat together, where lower levels follow settings or temperature alone. It is the level least affected by changes in the room, the green coffee or the charge weight, and it is fitted to the Micro Roast-Master.
What is the difference between Level 3 and Level 4 automation?
Level 3 (Auto-Pilot) follows a saved temperature curve and corrects the heat when readings drift. Level 4 (Roast-Master) follows the whole roast plan: bean temperature, rate of rise, pressure difference, time and heat together. Level 3 is what mainstream high-end roasters offer today, and Level 4 holds a roast steadier when conditions change.
What are the levels of coffee roaster automation?
Rubasse defines four. Level 1 is digital assist: the roaster records and controls digitally but you roast by hand. Level 2 replays your settings. Level 3 follows a temperature curve and corrects as it goes. Level 4 follows the whole roast plan. The Rubasse roasters we stock in the UAE are Level 3 or Level 4, and Level 2 is available by pre-order on select models.
Do I need Level 4 automation?
Rubasse recommends Level 4 if you carry more than about 30 coffees, or if you roast to order and hold no roasted stock. For a shorter list of coffees and a steady routine, Level 3 does the job well. If your green coffee sits for more than a month, choose Level 3 at least, because stored coffee shifts with the weather.
Come and watch one roast
Tell us what you roast and how much. We will point you at the right model, send a quote in AED and book you a demo at Port Rashid. Bring your own green coffee.
